Table of Contents
Advertisement
Releasing or locking RFID cards
A preconfigured list containing all User cards for which approval is given is saved locally in
the Wallbox.
Figure 5-2
Releasing and locking RFID cards
Releasing/locking with Admin card
1. Hold an Admin card in front of the RFID reader. An acoustic signal is emitted.
It is now possible to manage the RFID cards.
2. Adding and removing:
– Hold a new User card in front of the RFID reader. An acoustic signal is emitted.
– Hold a released User card in front of the RFID reader. An acoustic signal is emitted.
3. Hold another User card in front of the RFID reader to release or lock User cards in the
preconfigured list.
If necessary, repeat this process as often as desired.
4. Hold an Admin card in front of the RFID reader to end management of RFID cards. An
acoustic signal is emitted.
VersiCharge AC Wallbox IEC
Operating Instructions, 12/2021, A5E50366109-AA
The new User card has been added to the preconfigured list.
The User card has been removed from the preconfigured list.
Commissioning
5.4 Managing and using RFID
47
Advertisement
Table of Contents
