Table of Contents
Advertisement
Preparing the assembly
1. Check the prerequisites in the chapter Preparations for mounting (Page 23).
2. Carefully open the packaging.
3. Provide a base for setting the Wallbox down.
4. Carefully remove the Wallbox from the packaging.
5. Check the Wallbox for damage. Complaints filed after installation will not be accepted.
6. Check the package content (Page 19)
Risk of electric shock due to exposed electrical connections and components
Before starting the installation work, check that the supply cable has been disconnected
from the mains and secured against restart.
If damage or tampering is visible (e.g. on the enclosure, socket), do not operate the
Wallbox.
VersiCharge AC Wallbox IEC
Operating Instructions, 12/2021, A5E50366109-AA
DANGER
Mounting / Installing / Connecting
4.3 Assembly procedure
25
Advertisement
Table of Contents
