Siemens VersiCharge AC Wallbox IEC Operating Instructions Manual page 27

Mounting / Installing / Connecting
4.3 Assembly procedure
Mounting the wall bracket
1. Remove the wall bracket from the Wallbox.
Figure 4-1
2. Align the wall bracket to the mounting surface using a spirit level. Use the wall bracket to
mark the mounting holes.
Figure 4-2
3. Put the wall bracket to one side and drill the holes in the wall.
4. Insert the dowels in the drilled holes.
26
Removing the wall bracket
Drill picture
VersiCharge AC Wallbox IEC
Operating Instructions, 12/2021, A5E50366109-AA