Table of Contents
Advertisement
Figure 4-5
4.7
Limiting the charging current
The rated current of the respective model (see nameplate) is set for the Wallbox in the
factory. This can be limited further using the selector switch placed on the charging
controller, see the figure below.
Note
Work can only be performed by an qualified electrician
Only a qualified electrician can limit the maximum charging current to the infeed power
using the rotary switch. The design and protection of the supplying current circuit must be
adapted to the set charging current. Observe the local regulations and connection conditions.
VersiCharge AC Wallbox IEC
Operating Instructions, 12/2021, A5E50366109-AA
Infeed of Wallbox 8EM1310-..0.-....
Mounting / Installing / Connecting
4.7 Limiting the charging current
31
Advertisement
Table of Contents
