Internet connection disconnects.
STEPS
1
Check the schedule rules.
2
If you use PPPoA or PPPoE encapsulation, check the idle time-out setting.
3
Contact your ISP.
A.9 Problem: Can't Access Remote Management
I cannot remotely manage the DSL-2120/2120W from the LAN or WAN.
STEPS
1
Refer to the Remote Management Limitations section in the Firmware and Configuration
File Management chapter for scenarios when remote management may not be possible.
2
Use the DSL-2120/2120W's WAN IP address when configuring from the WAN.
Use the DSL-2120/2120W's LAN IP address when configuring from the LAN.
3
Refer to Section A.5 for instructions on checking your LAN connection.
Refer to Section A.6 for instructions on checking your WAN connection.
4
See also the Section A.3.
A.9 Problem: Can't Access Remote Node Connection
I cannot connect to a remote node or ISP.
STEPS
1
Check the WAN screen to verify that the username and password are entered properly.
2
Verify your login name and password for the remote node.
3
If the problem persists, you may need to verify your login and password with your ISP.
Proprietary & Confidential
Revision: V1.0
CORRECTIVE ACTION
CORRECTIVE ACTION
CORRECTIVE ACTION
Page 75 of 86
Apr. 23, 2008