Router Local Ip; Explaining Rip Setup - E-data DSL-2120 Series User Manual

4.3.1 Router Local IP

The following table describes the labels in this screen.
LABEL
IP Address
IP Subnet Mask
Dynamic Route
Multicast

4.3.1.1 Explaining RIP Setup

Routing Information Protocol (RIP) allows a router to exchange routing information with
other routers. The RIP Direction field controls how RIP packets are allowed to enter and leave
the router. Selecting Both means the DSL-2120/2120W will broadcast its routing table and
incorporate the RIP information that it receives. Selecting "In Only" means the
DSL-2120/2120W will only accept RIP packets received, not send RIP packets. Selecting "Out
Proprietary & Confidential
Revision: V1.0
Enter the IP address you wish to use with your LAN here.
Enter the IP subnet mask you wish to use with your LAN here.
Select the Routing Information Protocol (RIP) you wish to use from the
dropdown list and the direction you want from the dropdown list. The
RIP and direction options are described below.
Select the multicast protocol you wish to use from the dropdown list.
Page 27 of 86
DESCRIPTION
Apr. 23, 2008