Table of Contents
Advertisement
The following table describes the labels in this screen.
LABEL
Username
Password
VPI
VCI
Connection Type
Your ISP should provide the above information. Note that you must enter the user name
exactly as your ISP assigned it. If the assigned name is in the form of
domain identifies a service name, enter it exactly as given. Click on BACK to return to the
previous screen, on NEXT to continue, or on EXIT to exit the wizard without saving.
3.3.4 Configuring PPPoA
Point-to-Point Protocol over ATM Adaptation Layer 5 (AAL5) (PPPoA) provides access
control and billing functionality in a manner similar to dial-up services using PPP. The
DSL-2100 encapsulates the PPP session based on RFC1483 and sends it through an ATM
PVC to the ISP's DSLAM. Please refer to RFC 2364 for more information on PPPoA. Refer to
RFC 1661 for more information on PPP.
Proprietary & Confidential
Revision: V1.0
Enter your username here.
Enter your password here.
Enter the VPI here. VPI can range from 0 to 255.
Enter the VCI here. VCI can range from 1 to 65535.
Select your connection type from the dropdown list.
Page 17 of 86
DESCRIPTION
user@domain
where
Apr. 23, 2008
Advertisement
Table of Contents
