Table of Contents
Advertisement
Encapsulation
Static IP Address
IP Subnet Mask
Gateway
NAT
Default Route
TCP MTU Option
Dynamic Route
Multicast
Your ISP should provide the above information.
4.2.2.3 PPPoE/PPPoA
The following table describes the labels in this screen.
LABEL
Username
Password
Proprietary & Confidential
Revision: V1.0
Select your encapsulation type from the dropdown list.
Enter the static IP Address here.
Enter the IP Subnet Mask here.
Enter the Gateway address here.
Select whether NAT is Enabled or Disabled.
Select whether this PVC will be the default route for Internet data.
Enter you TCP MTU bytes here. (Default is 0 bytes)
Select the RIP type and direction from the dropdown lists.
Select the multicast protocol you wish to use from the dropdown list.
Enter your username here.
Enter your password here.
Page 25 of 86
DESCRIPTION
Apr. 23, 2008
Advertisement
Table of Contents
