Chapter 6 - The Access Management Screens
The access management screens help you manage what can access your network.
6.1 The ACL Screen
Access Control Listing (ACL) is a management tool that acts as a filter for incoming or
outgoing packets, based on application.
The following table describes the labels in this screen.
LABEL
ACL
ACL Rule Index
Active
Secure IP Address
Application
Interface
Access Control Listing is a list of all the rules you have set for access control. When you
are done making changes, click on SAVE to save your changes, DELETE to delete the rule
with the parameters you set or CANCEL to exit without saving.
Proprietary & Confidential
Revision: V1.0
ACL can be toggled Activated or Deactivated. ACL must be Activated
before you can edit the settings.
Select the rule index you wish to edit.
Toggle the rule on or off with Yes or No, respectively.
Enter the IP address you wish to give access. Note that entering 0.0.0.0
allows all packets access.
Select the application you wish to give access. Note that the first
application you give access should be Web, or you will no longer be able
to access the router through the Web configurator.
Select the interface the above rules should modify.
Page 46 of 86
DESCRIPTION
Apr. 23, 2008