Table of Contents
Advertisement
processing overhead, this method may be advantageous if it is not practical to have a separate
VC for each carried protocol; for example, if charging heavily depends on the number of
simultaneous VCs.
3.3.7 VPI and VCI
Be sure to use the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
numbers assigned to you. The valid range for the VPI is 0 to 255. The valid range for the VCI is
32 to 65535. 0 to 31 is reserved for local management of ATM traffic.
3.4 Finishing the Wizard
The Quick Start wizard now has all the information it needs. Click on BACK to make
changes or correct mistakes. Click on NEXT to save the current settings. Click on EXIT to exit
the wizard without saving.
Your changes have been saved. Click on CLOSE. The Quick Start wizard window will
close.
Proprietary & Confidential
Revision: V1.0
Page 20 of 86
Apr. 23, 2008
Advertisement
Table of Contents
