Chapter 5 - The Advanced Setup Screens
The advanced setup screens help you manage how data enters and exits your
DSL-2120/2120W.
5.1 The Routing Screen
Routing directs your DSL-2120/2120W to forward data to specific IP addresses.
This screen shows the routing rules you have already set. A few defaults have been
configured for you. To add your own route, click on the Add Route button.
The following table describes the labels in this screen.
LABEL
Destination IP Address
IP Subnet Mask
Gateway IP Address
Metric
Announce in RIP
The destination IP address is the IP network address of the final destination of packets
Proprietary & Confidential
Revision: V1.0
Enter the destination IP address for this routing rule.
Enter the destination IP subnet mask for this routing rule.
Enter the gateway IP address for this routing rule or select which PVC
will be affected by this routing rule.
Enter the metric for this routing rule.
Choose whether this route is included in RIP broadcasts.
Page 35 of 86
DESCRIPTION
Apr. 23, 2008