Resetting The Dsl-2120/2120W; Using The Reset Button - E-data DSL-2120 Series User Manual

firmware and to run diagnostic tests on the DSL-2120/2120W.
Click on Status to see DSL-2120/2120W device information, system logs and
performance statistics.
Click on Help to see available help topics.

2.3 Resetting the DSL-2120/2120W

If you should forget your password, or if you can't gain access to the DSL-2120/2120W,
you will have to reload the factory-default configuration file or use the RESET button on the
back of the DSL-2120/2120W device to regain access. Uploading the default configuration file
replaces the current configuration file. You will lose all your previously-saved configurations.
The password will also be reset to "1234".

2.3.1 Using The Reset Button

Step 1. Make sure the SYS LED is on and not blinking.
Step 2. Press and hold the RESET button for five seconds, and then release it. When the SYS
LED begins to blink, the default configurations have been restored and the
DSL-2120/2120W will then restart.
Proprietary & Confidential
Revision: V1.0
Page 11 of 86
Apr. 23, 2008