Action - E-data DSL-2120 Series User Manual

Source Port Range
Protocol ID
Vlan ID Range
IPP/DS Field
IP Precedence Range
Type of Service
DSCP Range
802.1p

5.3.2 Action

After finishing all rules detail condition setting, select the rule you want to execute and
action here.
The following table describes the labels in this screen.
LABEL
IPP/DS Field
IP Precedence Remarking
Type of service Remarking
DSCP Remarking
802.1p Remarking
Queue #
Proprietary & Confidential
Revision: V1.0
Set the port range value that you want to filter in source side
Set the protocol ID type that you want to filter
Set the Vlan value that you want to filter
Select IP QoS format
Select the IP precedence range
Select 5 different type of service
Set the DSCP value that you want to filter
Set the remarked new 802.1p priority value on the packet that fulfill every
detail setting condition of each rule
Select IP QoS format
Select the remarking value of IP precedence
Select the remarking value of type of service
Select the remarking value of DSCP
Select the remarking value of 802.1p
Select four types of Queue: Low, Medium, High, Highest
Page 44 of 86
DESCRIPTION
Apr. 23, 2008