Table of Contents
Advertisement
The following table describes the labels in this screen.
LABEL
VPI
VCI
IP Address
Subnet Mask
ISP Gateway
Connection Type
Your ISP should provide this information. Click on BACK to return to the previous screen,
on NEXT to continue, or on EXIT to exit the wizard without saving.
3.3.3 Configuring PPPoE
PPPoE provides access control and billing functionality in a manner similar to dial-up
services using PPP. The DSL-2120/2120W bridges a PPP session over Ethernet (PPP over
Ethernet, RFC 2516) from your computer to an ATM Permanent Virtual Circuit (PVC) that
connects to the ADSL Access Concentrator, where the PPP session terminates. A single PVC
can support any number of PPP sessions from your LAN. For more information on PPPoE, see
the appendix.
Proprietary & Confidential
Revision: V1.0
Enter the VPI here. VPI can range from 0 to 255.
Enter the VCI here. VCI can range from 1 to 65535.
Enter the IP address here.
Enter the Subnet Mask here.
Enter the ISP Gateway here.
Select your connection type from the dropdown list.
Page 16 of 86
DESCRIPTION
Apr. 23, 2008
Advertisement
Table of Contents
