Table of Contents
Advertisement
The following table describes the labels in this screen.
LABEL
Username
Password
VPI
VCI
Connection Type
Your ISP should provide the above information. Note that you must enter the user name
exactly as your ISP assigned it. If the assigned name is in the form of
domain identifies a service name, enter it exactly as given. Click on BACK to return to the
previous screen, on NEXT to continue, or on EXIT to exit the wizard without saving.
3.3.5 Configuring Bridge Mode
RFC 1483 explains two methods for Multiprotocol Encapsulation over AAL5. The first
method allows multiplexing of multiple protocols over just one ATM virtual circuit (LLC-based
multiplexing). The second method assumes that each individual protocol is carried over a
separate ATM virtual circuit (VC-based multiplexing). Please refer to RFC 1483 for more
information.
Proprietary & Confidential
Revision: V1.0
Enter your username here.
Enter your password here.
Enter the VPI here. VPI can range from 0 to 255.
Enter the VCI here. VCI can range from 1 to 65535.
Select your connection type from the dropdown list.
Page 18 of 86
DESCRIPTION
user@domain
where
Apr. 23, 2008
Advertisement
Table of Contents
