Digitaliocontrol - Toshiba BU505MCG Instruction Manual

DigitalIOControl

This section describes DigitalIOControl category for the BU series.
This camera provides GPIO output selected by the register setting. And the polarity of the signal is able to
switch by the register setting. The following chart shows the specifications of the selectable signals.
TIMER0 ACTIVE
FRAME ACTIVE
FRAME TRIGGER
● Registers
Register Visibility
LineModeAll Beginner
LineInverterAll Beginner
LineStatusAll Beginner
UserOutputValueAll Beginner
LineSelector Beginner
LineSource Beginner
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
EXT_TRIG
Exposure
VD
Sensor Output
USB Streaming
EXPOSURE
ACTIVE
FRAME
TRANSFER
WAIT
Selectable signals
Access
R/W Selects the Input / Output of each Line.
R/W Selects the polarity of each Line signal.
R Returns the status of each Line signal.
R/W Sets the user output value.
R/W Selects the Line of I/O connector.
R/W Selects the source of the output signal.
Delay Duration
Description
57 / 92
* ActiveLow
D4253386C
http://www.toshiba-teli.co.jp/en/