Lutcontrol - Toshiba BU505MCG Instruction Manual

LUTControl

This function allows you to apply the
● Registers
Register Visibility
LUTEnable Beginner
LUTIndex Beginner
LUTValue Beginner
● Setting
- Set the activation of LUT
Set the following value to "LUTEnable" register. The setting value is Boolean type.
- Set the input/output value of LUT
Set the following value to "LUTIndex", "LUTValue" registers. These setting values are Integer type.
"LUTIndex" register value is input level of LUT, and "LUTValue" register value is output level of LUT.
● Note
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
LUT(input: 12it, output: 12bit) to the output images.
arbitrary
Output
luminance
example of LUT setting
Access
R/W Sets the activation of LUT function.
R/W Sets the input level of LUT.
R/W Sets the output level of LUT.
setting value
OFF (*)
ON
* initial factory setting
LUTIndex / LUTValue
Minimum (*)
Maximum
* initial factory setting
72 / 92
Binarization
Input
luminance
Description
function
Inactive
Active
setting value
0
4095
http://www.toshiba-teli.co.jp/en/
D4253386C