Toshiba BU505MCG Instruction Manual page 69

- Set BalanceRatio
Set the following value to "BalanceRatio" register. The value is to be applied to selected color
component. Setting value is Float type.
Notes on white balance gain setting:
Too high white balance gain increases noises. After adjusting the white balance of the image, I ask you to have final
image quality checked with your environment.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
BalanceRatio
Minimum
Maximum
* initial factory setting value is device-specific
68 / 92
Value
x 1.0
x 8.0
http://www.toshiba-teli.co.jp/en/
D4253386C