Toshiba BU505MCG Instruction Manual page 43

● Setting
- Select an image format.
Select "Fomat2" of "ImageFormatSelector" register.
- Set Decimation lines
Set the "2" to "DecimationHorizontal", "DecimationVertical" registers. When you set up a value of the one
side for horizontal or vertical binning, the other side of the value is set up automatically. Setting value is
Integer type.
● Note
Decimation is disabled when the camera is running in Scalable mode or Binning mode.
Scalable and Binning are disabled when the camera is running in Decimation mode.
Changing "DecimationHorizontal", "DecimationVertical" register value is invalid during image stream data
output.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
42 / 92 D4253386C
http://www.toshiba-teli.co.jp/en/