Toshiba BU505MCG Instruction Manual page 87

● Setting
- Register to the sequence
Set the sequence number to "SequentialShutterIndex" register, and set the UserSet number to
"SequentialShutterEntry" registers. These setting values are Integer type.
- Register the loop termination
Set the number of Index to repeat to "SequentialShutterTerminateAt" register.
For example, If you set [3] to "SequentialShutterTerminateAt" register, camera captures the images of
Index1, Index2 and Index3. Then repeats capturing the images of Index1, Index2...
- Set the activation of Sequential Shutter
Set the following value to "SequentialShutterEnable" register. The setting value is Boolean type.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
SequentialShutterIndex
Minimum (*)
Maximum
* initial factory setting
SequentialShutterEntry
Minimum (*)
Maximum
* initial factory setting
setting value
OFF (*)
ON
* initial factory setting
86 / 92
setting value
1
16
setting value
UserSet1
UserSet15
function
Inactive
Active
http://www.toshiba-teli.co.jp/en/
D4253386C