Digitaliocontrol - Toshiba BU406M Instruction Manual

DigitalIOControl

This section describes DigitalIOControl category for the BU series.
This camera provides GPIO output selected by the register setting. And the polarity of the signal is able to
switch by the register setting. The following chart shows the specifications of the selectable signals.
● Registers
Register Visibility
LineModeAll Beginner
LineInverterAll Beginner
LineStatusAll Beginner
UserOutputValueAll Beginner
LineSelector Beginner
LineSource Beginner
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Fig. Selectable signals
Access
R Returns the direction of each Line signal.
R/W Selects the polarity of each Line signal.
R Returns the status of each Line signal.
R/W Sets the user output value.
R/W Selects the Line of I/O connector.
R/W Selects the source of the output signal.
48 / 65
Description
www.toshiba-teli.co.jp
D4223121B