Toshiba BU505MCG Instruction Manual page 67

- Set Saturation
Set the following value to "Saturation" register. The value is to be applied to selected saturation
component. Setting value is Float type.
● Note
Hue/Saturation control is available in following PixelForamt modes.
Bayer8/10/12-Full, RGB8, BGR8, YUV411, YUV422
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
Saturation
Minimum
Maximum
* initial factory setting = x 1.3
66 / 92
Value
x 0
x 2.0
http://www.toshiba-teli.co.jp/en/
D4253386C