Timercontrol - Toshiba BU505MCG Instruction Manual

TimerControl

This section describes TimerControl category for the BU series.
This camera series is able to generate Timer0Active signal, derived from exposure start, by register setting.
This signal can be used as strobe control signal.
EXPOSURE ACTIVE
TimerTriggerSource = Line0Active
TimerTriggerSource = FrameTrigger
TimerTriggerSource = ExposureStart
● Registers
Register Visibility
TimerSelector Beginner
TimerDuration Beginner
TimerDelay Beginner
TimerTriggerSource Beginner
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
TRIG_IN
(Line0)
Trigger
(Frame Start Trigger)
Exposure
TIMER0 ACTIVE
Timer0Active
Access
R Returns the selected timer name.
R/W Sets the width of Timer0Active signal.
R/W Sets the delay of Timer0Active signal.
R/W Selects the source of Timer0Active pulse to start.
TriggerDelay
Delay Duration
Description
60 / 92
※ ActiveLow
D4253386C
http://www.toshiba-teli.co.jp/en/