Removing The Power Supply; Rear Panel View Showing The Lever Point For The Screw; Power Supply And Primary Section Shielding Location - HP 8114A Service Manual

HP 8114A Service Guide

Removing the Power Supply

panel of the chassis. See Figure 4-4.
2. Disconnect the power supply from the motherboard by levering
the power supply slide with a flat screwdriver at the lower right.
hand side corner at the rear panel (close to the fuse), then pull the
power supply slide out of the chassis. Figure 4-4 shows the lever
point, at the rear panel.
Rear Panel View Showing the Lever Point for the Screw Driver Rear Panel View Showing the Lever Point for the Screw Driver

Power Supply and Primary Section Shielding Location

FIXING SCREWS FIXING SCREWS
Figure 4-4. Figure 4-4.
-- ?owEa
Figure 4-5.