Hp 8114A Pulse Generator Specifications; General; Environmental; Safety - HP 8114A Service Manual

HP 8 114A Pulse Generator Specifications

General

Environmental

Safety

Power requirements

Maximum Dimensions (H x W x D)

Weight

Specifications describe the instrument's warranted performance.
Non-warranted values are described as typical. All specifications
apply after a 30 minute warm- up phase with 50 Ohm source
impedance into a 50 Ohm load, and are valid from 0°C to 55°C
ambient temperature. Non-warranted values are described as
'typical'. Parameters are are over- and under-programmable outside
their specified ranges.
IEC348, safety class 1
Power consumption: 500 VA max.
133 mm H x 426 mm W x 422 mm D (5.2 in x 16.8 in x 16.6 in)
N e t
14 kg (30.8 lb)

Shipping

17 kg (37.4 lb)
HP 8114A Pulse Generator