Raven Hawkeye 2 Installation Manual page 42

CHAPTER 5
FIGURE 7. Bulkhead Connection of Power Cable and Left/Right Cable
12. On the front side of the center section, route the left/right cable fuse and relay blocks toward the center of the
machine and secure with zip ties.
13. Locate the connector labeled "RIGHT BOOM" and connect it to the right inner boom cable.
14. Locate the "LEFT BOOM" connector and route it along the top side of the center section and towards the left
boom.
15. Connect the "LEFT BOOM" connector to the mating connector on the left inner boom cable.
16. Use zip ties to secure all routed cables.
38 Hawkeye® 2 Installation Manual for New Holland/Miller MY 2018 Small Frame and MY 2019+ All Frames