Raven Hawkeye 2 Installation Manual page 36

CHAPTER 4
8. Once all boom cables are routed along the boom as desired, begin connecting the boom cables to the
Hawkeye® 2 NCVs previously installed.
9. Use provided cable ties to secure the boom cables to the boom components as needed to ensure they are
secure.
NOTE: Do not put strain on cables and connections while applying tie-downs.
Do not leave any exposed cable loops that may get caught on crops or other debris while the vehicle
is in use.
10. The inner boom cables will be connected to the LEFT/RIGHT chassis cable in a later section.
FIGURE 4. Outer Boom Cable Section Installed
32 Hawkeye® 2 Installation Manual for New Holland/Miller MY 2018 Small Frame and MY 2019+ All Frames