Installation
6
Requirements
6.1
Installation/setup room
The unit may only be used in a room that has
❯
been set up specifically for this purpose (e. g.
an x-ray room). Do not use outdoors.
Do not expose the unit to direct sunlight or
❯
heat.
The setup room may not contain any major
❯
interference fields (e. g. strong magnetic fields).
They could cause malfunction in the unit.
6.2
Monitor
The monitor must meet the requirements for digi-
tal X-ray with a high light intensity and wide con-
trast range.
Strong ambient light, sunlight impinging directly
onto the monitor and reflections can make it
more difficult or even impossible to perform a
diagnosis based on the X-ray images.
2121100020L29 2101V007
Installation
EN-
US
15