Vecow ECX-2600 PEG User Manual page 116

4.5.1 HDD Security Configuration
Figure 4-5-1 : HDD Security Settings
Set User Password
Set HDD user password.
*** Advisable to power cycle system after setting hard disk passwords ***
Discard or save changes option in setup does not have any impact on HDD
when password is set or removed. If the 'Set HDD User Password' option is
gray, do power cycle to enable the option again.
4.5.2 Security Boot
Figure 4-5-2 : Security Boot Settings
Secure Boot
Secure Boot feature is active if secure boot is enabled, Platform Key (PK) is
enrolled and the system is in User mode.
Secure Boot Mode
Secure Boot mode selector Standard/Custom.
In custom mode Secure Boot Variables can be configured without authentication
Key Management
Enables expert users to modify Secure boot policy variables without full
authentication
©Vecow ECX-2600/2400/2300 PEG User Manual BIOS SETUP 108