Vecow ECX-2600 PEG User Manual page 34

2.2.9 Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel
LAN 2 is powered by Intel
work in normal status, iAMT 11.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer, or to
any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pin-outs of LAN 1 and LAN 2 are listed as follows :
Pin No.
1
2
3
4
5
6
7
8
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color
Right
Left
©Vecow ECX-2600/2400/2300 PEG User Manual
®
I210 Ethernet engine. When both LAN 1 and LAN 2
10/100 Mbps
E_TX+
E_TX-
E_RX+
-----
-----
E_RX-
-----
------
10Mbps
Green/
Off
Orange
Twinkling
Green
Green
GETTING TO KNOW YOUR ECX-2600/2400/2300 PEG
®
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
100Mbps 1000Mbps
Solid Solid
Green Orange
Twinkling Twinkling
Green Green
i219 Ethernet Phy;
1 8
26