Table of Contents
Advertisement
2.3.5 PoE Ports
2.3.5.1 ECX-2600/2400 PEG
There are 4 RJ45 connectors in the rear side of ECX-2600/2400 PEG. It supports IEEE
802.3at (PoE
port and 1000BASE-T gigabit data signals over standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 and LAN 6 are listed as follows :
Pin No.
1
2
3
4
5
6
7
8
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000 Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color
Right
Left
POE LED
LED 1 - 4
©Vecow ECX-2600/2400/2300 PEG User Manual
+
) Power over Ethernet (PoE) connection delivering up to 37W/54V per
10/100 Mbps
E_TX+
E_TX-
E_RX+
------
------
E_RX-
------
------
10Mbps
Green/
Off
Orange
Twinkling
Yellow
Yellow
LED Color
Solid Green
®
I350 Gigabit Ethernet controller and
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
100Mbps
1000Mbps
Solid
Green
Twinkling
Twinkling
Yellow
POE Status
POE ON
GETTING TO KNOW YOUR ECX-2600/2400/2300 PEG
PoE
PoE+
PoE+
PoE-
------
------
PoE-
------
------
1
Solid
Orange
Yellow
8
34
Advertisement
Table of Contents
