Keenon Robotics PEANUT M2 User Manual page 9

Disinfection robot
Table of Contents

Advertisement

starts spraying for disinfection and continues this operation along the way back and forth.
Meanwhile, the robot will send a voice prompt every 2 minutes until the disinfection process for
pre-set number of cycles is completed. After that, the robot continues to spray on the next route or
returns to the original point. This mode is always used when there are people around, which will not
do any harm to people.
Under the fixed-point mode, the user may select one or more routes (maximum 4 routes for the
current version). Firstly, Press on the button 'Go' to start the robot; when reaching the destination,
the robot will send a voice prompt. Then, it operates ultraviolet disinfection and sends a voice
prompt every 2 minutes until the pre-set disinfection time is over. After that, the robot continues
disinfection operation on the next point or returns to the original point. This mode is always used
when there is no people around. Please keep away from the robot under the fixed-point mode to
prevent damage caused by ultraviolet radiation.
Under the dual mode, the user may select one or more routes (maximum 4 routes for the
current version). Firstly, Press on the button 'Go' to start the robot; when reaching the destination,
the robot will send a voice prompt. Then, it operates both ultraviolet and spraying disinfection while
sending a voice prompt every 2 minutes until the pre-set disinfection time is over. After that, the
robot continues disinfection on the next point or returns to the original point. Please keep away
from the robot under the dual mode to prevent damage caused by ultraviolet radiation.
In the disinfection process, each mode supports the functions of suspending disinfection and
ending tasks, and the interface of the robot displays the remaining disinfection time or disinfection
mileage.
Upon completion of each disinfection task, the main interface will update to display the
operation statistics this day, such as cumulative disinfection time, cumulative disinfection mileage
and cumulative task volume.
Warning:
8

Advertisement

Table of Contents
loading

Table of Contents