Troubleshooting And Parameters Of The Robot; List Of Exception And Troubleshooting - Keenon Robotics PEANUT M2 User Manual

* Note:
The gap of the laser layer is the only force-bearing part of the robot to be handled. When
moving robots, you should strictly follow the instructions. It is strictly prohibited to directly pull
and lift the bottom of the robot, turn over the robots, or directly lift the robot's face and head. The
damage to the robot caused by improper operation during handling shall be borne by the user.

4. Troubleshooting and Parameters of the Robot

4.1 List of Exception and Troubleshooting

Failure Description
The robot cannot be
turned on normally.
The robot cannot be
charged normally.
Fig. 7 Schematic diagram for moving the robot
Possible Causes and Solutions to the Problems
1. The battery of the robot is low, please charge the robot
through the adapter.
2. For other causes, please contact the seller.
1. Please press the yellow indicator light of the adapter,
then the indicator will turn red.
2. For other causes, please contact the seller.
14