Keenon Robotics PEANUT M2 User Manual page 16

The robot cannot move
and navigate.
The robot cannot
broadcast by voice.
The robot moves
abnormally.
The robot falls.
1. The robot is in the blind area of the map, please turn off
the robot and push it to the vicinity of the starting point
to start navigation again.
2. The top camera, stereo vision or the gap of the laser
layer is covered; please ensure that the above modules
are not covered.
3. The robot's radar is malfunctioning, please check
whether the radar is rotating normally。
4. The collision switch of the robot is malfunctioning,
please check whether the collision switch is squeezed.
5. For other causes, please contact the seller.
1. The voice function of the robot is turned off or the
volume is too low; please reset the voice.
2. For other causes, please contact customer service
personnel.
Please turn off the power of the robot immediately and
contact the seller.
Please turn off the power of the robot immediately and
contact the seller.
15