Emergency - Keenon Robotics T5 User Manual

Emergency

When the robot presents the following situations, the user can shut down the robot
by pressing the emergency stop switch at the back of the robot:
① The user needs to move the robot when it is operating
② The robot is in a state of abnormal operation, which may cause damage and
other situations to the surrounding environment
The position of the emergency stop switch and the operation steps are shown in
Figure 5:
19.Emergency Stop Switch
Figure 5 Partial Enlarged Drawing after Opening the External Cover of the Emergency Stop
Switch
The emergency stop switch of the robot is on the top of the robot, i.e. the location
shown by No. ⑧ in the figure. The emergency shutdown of the robot can be
realized by pressing the red emergency stop switch.
20