Keenon Robotics T5 User Manual page 19

3. The user triggers the charging of robot manually
The user can trigger and control the automatic recharging of the robot by
operating the PEANUT APP. The specific operation steps are as follows:
① Enter the user setup page and find [Charging Setup], or enter the super
setup page and find [Power Management].
② Click the [Charge Immediately] button, and the robot will set out
immediately to look for the charging pile for charging.
③ After the robot arrives at the location of charging pile, it starts to match
and connect the charging pile autonomously.
④ Charging can be started after the robot has matched and connected the
charging pile.
The user can also push the robot manually to the charging pile for charging,
and the specific operations are as follows:
① Enter the user setup page and find [Charging Setup]; or enter the super
setup page and find [Power Management].
② Click [Push to Charging Pile Manually] below [Charge Immediately], and
the page will skip to the manual charging page.
③ The user can push the robot to the location of charging pile manually.
④ Align the back of robot with the charging pile, then push the robot onto
the charging pile, making the automatic recharging port at the bottom of
robot contact with the contact plate of charging pile.
⑤After the contact is successful, the page will display the successful
connection, and the charging can be started.
19