Startup - Keenon Robotics T5 User Manual

Startup

1. Power-on/Power-off Button
The power switch is located on the chassis behind the robot. Open the silica
gel cover below the chassis, and a button on the left will be seen, namely the
power switch. Find the position of the power switch as shown in Figure
3,press the power switch with a finger, and the robot will be booted. After the
system is booted, the robot can be used normally after waiting for about 40s.
When the robot needs to be powered off, please turn off the power switch in
the same way. After the power switch is turned off, the robot will be powered
off immediately.
2. Booting of the PEANUT APP
1
After booting the power switch, the system desktop will display the
startup LOGO, PEANUT animation and Android desktop in sequence,
and the system booting duration is about 40s.
2
Under the default setting, the system will start the PEANUT APP
automatically after it is booted. If the system fails to boot the PEANUT
APP, please find the PEANUT icon on the desktop, as shown in Figure 4,
and click this icon to boot the APP.
Figure 3 Location Diagram of the Power Switch
Note: Firstly, open the silica
gel cover below the chassis,
and press the red button on
the left with a finger
10