Table of Contents
Advertisement
3.
Adaptercharging(notadviseuse, forbidoperatingrobotduring the adapter
charging)
Under the situation that robot battery power volume completely
exhausted and can' t start machine, can charging the robot as the below process:
① Close machine' s power supply switch.
② Open the exterior silica gel cover of [Manual charging pot] at back of robot,
use the charging plug of adapter connect robot.
③ The adapter indicate lamp change to be red after connected successfully, means
the charging progressive.
④ It means charging finished after adapter indicate lamp change to be
green. Please break the adapter and fill in the silica gel cover outside the
charging port of robot well.
Sound talking
The robot can do intelligent interactive with people through sound, the process as below:
① Click the robot icon on the home page, enter into software [Function menu]
page.
② Click [Sound chatting] page, enter into chatting mode.
③ Click the up left [<] return button, return to the software menu select page.
④ Soundchattingsupportonlinemode(connectnetwork), offlinemode(not
connect network).
Emergency handle
The userscan make the robot stop running through pressdown the emergency
stop switch which at the back of robot when the emergency situation that robot
be at abnormal running statusor occur unexpected situation and maybe caused
harmful the surrounding environment. The position and operating process of
emergency switch shown aspicture 5:
·
·
16
Advertisement
Table of Contents
