Operation Steps; Installation - Keenon Robotics T5 User Manual

Operation Steps

Please start to use your robot by observing the following operation steps.

Installation

1. Mapping by the Robot
Before autonomous movement, the robot needs to get familiar with the mobile
environment, stores and identifies the operation environment in the mode of
map. This step is called mapping.
When the robot's indoor environment has significant changes (for example,
re-decoration, the movement of the robot to a new operation site, or the
rearrangement of indoor items), please contact the customer service via 400-
9651-808 for re-mapping.
2. Arrangement of Charging Pile
The robot has the automatic recharging function, the charging pile shall be
installed in a location convenient for charging on the operational site, and the
installation of charging pile shall be completed by the technician of the
manufacturer. Once it is fixed, please don't move it arbitrarily. If the location
of charging pile needs to be changed, please contact the customer service via
400-9651-808 to reset the location of the charging pile.
9