Measuring Procedure - Lutron Electronics HT-3007SD Operation Manual

4. MEASURING PROCEDURE

4-1 Function selection
1) Turn on the meter by pressing the " Power Button "
( 3-2, Fig. 1 ) momentarily.
Pressing the " Power Button " ( 3-2, Fig. 1 )
*
continuously and > 2 seconds again will turn off the
meter.
2) The meter can select 4 kind function as :
a. Humidity/Temp.
b.Dew point ( Humidity )
c. Wet bulb ( Humidity )
d.Type K/J Thermometer
Pressing the " Function Button " ( 3-3, Fig. 1 )
continuously ( not release the button ), the Display
will show the following text in sequence :
rH Humidity/Temp. measurement
dP Dew point ( Humidity ) measurement
_Et Wet bulb Temp. ( Humidity )
measurement
tP Type K/J Thermometer measurement
Until the Display show the desired mode ( Function ),
just release the " Function Button " ( 3-3, Fig. 1 ), the
meter will execute this function with default.
7