Lutron Electronics HT-3007SD Operation Manual page 22

7-6 Select the Temp. unit to
When the lower display show " t-CF "
1) Use the "
▲
( 3-5, Fig. 1 ) to select the upper Display text to " C " or
" F ".
C - Temperature unit is ℃
F - Temperature unit is ℉
2) After Display unit is selected to " C " or " F ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-7 Set sampling time ( SecondS )
When the lower display show " SP-t "
1) Use the "
▲
3-5, Fig. 1 ) to adjust the value ( 1, 2, 5, 10, 30,60,
120, 300, 600, 1800,3600 seconds ).
2) After teh Sampling value is selected, press the "
Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-8 SD memory card Format
When the lower display show " Sd F "
1) Use the "
▲
3-5, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Intend to format the SD memory card
no - Not execute the SD memory card format
Button " ( 3-6, Fig. 1 ) or "
Button " ( 3-6, Fig. 1 ) or "
Button " ( 3-6, Fig. 1 ) or "
20
or
℃ ℉
Button "
▼
Button " (
▼
Button " (
▼