Lutron Electronics HT-3007SD Operation Manual page 21

7-4 Set beeper sound ON/OFF
When the lower display show " bEEP "
1) Use the "
▲
( 3-5, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
is power ON.
2) After select the upper text to " yES " or " no ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-5 Select the Thermometer to Type K or Type J
When the lower display show " tYPE "
1) Use the "
▲
( 3-5, Fig. 1 ) to select the Display unit to " K " or
" J ".
K - Type K thermometer
j - Type J thermometer
2) After Display unit is selected to " K " or " J ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
Button " ( 3-6, Fig. 1 ) or "
Button " ( 3-6, Fig. 1 ) or "
19
Button "
▼
Button "
▼