Set Clock Time ( Year/Month/Date, Hour/Minute/ Second ) - Lutron Electronics HT-3007SD Operation Manual

Remark :
During execute the " Advanced Setting " function,
if press " Esc Button " ( 3-2, Fig. 1 ) once will exit
the " Advanced Setting " function, the LCD will
return to normal screen.
7-1 Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
When the lower display show " dAtE "
1) Press the " Enter Button " ( 3-4, Fig. 1 ) once,
Use the "
▲
( 3-5, Fig. 1 ) to adjust the value ( Setting start from
Year value ). After the desired value is set, press the
" Enter Button " ( 3-4, Fig. 1 ) once will going to
next value adjustment ( for example, first setting
value is Year then next to adjust Month, Date, Hour,
Minute, Second value ).
2) After set all the time value ( Year, Month, Date, Hour,
Minute, Second ),
the screen will
jump to " SD card Decimal character " setting screen (
Chapter 7-2 ).
Remark :
After the time value is setting, the internal clock will
run precisely even Power off if the battery is under
normal condition ( No low battery power ).
Button " ( 3-6, Fig. 1 ) or "
17
Button "
▼