Set Clock Time ( Year/Month/Date, Hour/Minute/ Second ) - Lutron Electronics SPM-1116SD Operation Manual

Remark :
During execute the " Advanced Setting " function, if
press " SET Button " ( 3-6, Fig. 1 ) > 1.5 SECONDS will exit
the " Advanced Setting " function, the LCD will return to
normal screen.
7-1 Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
When the lower display show " dAtE "
1)Use the " Button " ( 3-5, Fig. 1 ) or "
▲
( 3-7, Fig. 1 ) to adjust the value ( Setting start from
Year value ). After the desired value is set, press the
" Enter Button " ( 3-8, Fig. 1 ) once will going to
next value adjustment ( for example, first setting
value is Year then next to adjust Month, Date, Hour,
Minute, Second value ).
Remark :
The adjusted value will be flashed.
2)After set all the time value ( Year, Month, Date, Hour,
Minute, Second ), press the " ENTER Button " ( 3-8,
Fig. 1 ) once will save the time value.
Remark :
After the time value is setting, the internal clock will
run precisely even Power off if the battery is under
normal condition ( Not low battery power ).
▼
17
Button "