Advanced Setting; Set Clock Time ( Year/Month/Date,Hour/Minute/ Second ) - Lutron Electronics PM-9112SD Operation Manual

7. ADVANCED SETTING

Under do not execute the Datalogger function,
press the " SET Button " ( 3-7, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode.
then press the " SET Button " ( 3-7, Fig. 1 ) once a while
in sequence to select the six main function, the
display will show :
DATE............Set clock time ( Year/Month/Date, Hour/Minute/
SP T..............Set sampling time ( Hour/Minute/Second )
POFF............ Auto power OFF management
BEEP............Set beeper sound ON/OFF
DEC.............. Set SD card Decimal character
SD F............. SD memory card Format
Remark :
During execute the " Advanced Setting " function,
if press " HOLD Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.

7-1 Set clock time ( Year/Month/Date,Hour/Minute/ Second )

When the upper display show " dAtE "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to adjust the value ( Setting start from
Year value ). After the desired value is set, press the
" Enter Button " ( 3-8, Fig. 1 ) once will going to
next value adjustment ( for example, first setting
value is Year then next to adjust Month, Date, Hour,
Minute, Second value ).
Second )
16