Features
High conversion efficiency with latest technologies
High efficiency: peak 97.9%
High power density in outdoor application: 146 W/l, 322 W/kg
Low standby power loss: < 25W @sleep mode
Integrated AC and DC switches for easy installation
Scalable up to 500 kW in parallel configuration
Quick system response time (< 40 ms)
IP55 enclosure compliance for outdoor application
Applications
Demand charge management (Power Dispatch)
Load shifting for Time-of-Use saving
Power quality improvement (P-Q Control, Frequency Regulation)
Emergency backup power
Accessory Kits
Check that the following items are included. Contact your vendor if any items are missing or appear
damaged.
4 x M16
expansion bolts
Wire Instructions:
Connect insulating sleeves between the wires and the two-hole terminals. The accessory kit includes
the insulating sleeves, alternatively you can use local materials as is appropriate.
Installation Manual
2 x keys
Figure 3. Final Wire Installation with Sleeve
6
Connectors:
1 x 15-pin, 2 x 6-pin,
1 x 3-pin and 1 x 2-pin
Introduction
14 x insulating tubing