Table of Contents
Advertisement
b. Remove the screws securing the front/rear base covers.
c. Remove the front and rear side panels.
d. Align the forklift with the bottom channels on the cabinet, see the following image.
e. Once aligned, insert the forks into the channels until they are completely through the
opposite side of the insertion channels.
WARNING!
!
Take care the unit is balanced and no risk to prevent it fell.
f.
Carefully lift the cabinet.
Installation Manual
Figure 28. Removing Front/Rear Base Covers
Figure 29. Front/rear Side Handling
27
Installation
Hide quick links:
Advertisement
Table of Contents
