Delta PCS100 Installation Manual page 23

5. Repeat for the rear panel.
Make sure the door limiter at the bottom of the panel engages in the track to keep the rear panel
from closing accidentally.
The rear panel locks in place when it is fully extended.
6. Locate the top cover, see the following figure and remove the screws from the front and rear
sides.
7. At least two individuals are required to safely lift the top cover. Lift both ends simultaneously and
remove the top cover from the PCS. Place the cover in a clean work surface as it is needed for
the final phase of the installation.
Installation Manual
Figure 16. Opening a Rear Panel
Figure 17. Locking a Rear Panel in a Cabinet
19
Installation