Table of Contents
Advertisement
3. Connect AC cables to AC terminals: Loose the hex socket screws of the AC terminals by
Allen wrench, then lead the AC cables with two-hole lugs through the AC cable glands into the
PCS, connect and secure these cables to the relevant "L1", "L2" and "L3" terminals.
Figure 64. AC Cable Connection with L1, L2, L3 Terminals
4. Reinstall and secure the AC protective cover.
Installation Manual
Figure 65. Installing AC Protective Cover
55
Wiring Instructions
OFF
ON
OFF
Hide quick links:
Advertisement
Table of Contents
