Unpacking The Unit - Delta PCS100 Installation Manual

Unpacking the Unit

Use a forklift to move and place the crate containing the PCS100 and the wooden pallet on a
designated location. Make sure the location is clean and prepared prior to moving the crate.
WARNING!
!
The PCS100 and crate have a combined weight of approximately 418 kg/921 lbs. DO
NOT attempt to lift and/or move the package/unit by hand. The unit is extremely heavy.
Attempting to move the unit by hand may lead to injury, damage, and even possibly death.
WARNING!
!
Before opening the package, make sure the Tip Tell label is OK. If the Tip Tell label
shows the PCS100 had topple and fall, immediately contact Delta and the Shipping
Company.
1. Use a ladder to reach the top of the PCS100.
2. Remove the screws securing the top cover.
3. Remove the top cover.
4. Remove the screws securing the left and right sidewalls from the shipping package.
5. Remove the right and left sidewalls.
Installation Manual
Figure 10. Removing a Top Cover
13
Installation